The LLE-045W Wireless Reverse Parking Sensor system comes with 4 x ultra-sonic compact and high-performance 22mm sensors heads. Both water & shock proof these sensors can be colour coded. The kit features a 8cm x 5.5cm full colour LCD display with voice alert. This system will transmit a perfect, reliable signal at 15 meters.
Everything needed for DIY install is included with this system- including 22mm hole cutter, cable ties, adhesive tape and full instructions.
Wireless Parking Sensor with Great Screen: As reviewed in MMM, "has good sensitivity and a large display of accurate distances", just what's need in fact! Even difficult targets for ultra-sonics like a standing person or a broomstick were detected at around 1m - 1.3m in these independent tests. Even better - this is a very affordable unit.
With both voice alert and multi-colour LCD display this wireless sensor unit is ideal for Caravans, Motorhomes, Motorcaravans, Campers, Horseboxes, Pickups and Boat Trailers. The display is especially helpful with clear indications of distance by sound, by display colour, by bar graph and by large number digital readout! If you need accurate sensing of objects behind you with an instantly clear readout and don’t want to run wires from the rear bumper to the dash then this is definitely the reversing sensor product for you. With easy installation and very low fitting time, the ultra sonic sensors pickup power from the reversing lights and transmit telemetry info to the wireless display anything up to 15 or more meters away.
A new breakthrough design senses any objects behind the bumper through 4 small (22mm) recessed Anti-Collision Radar rainproof sensors that are embedded into plastic or steel bumpers by drilling 22mm holes (drill bit included). The LCD Wireless display will work up to 15m / 65' feet away from the control unit and sensors. The built-in display speaker can be set to voice alert, beeping or mute. The full colour 8x5cm LCD display indicates distances in centimeters, in 3 indicator colours, and with 7 lights for full brightness, as well as obstacles on the left or right side on the screen. When reversing the vehicle the rear sensors automatically detect obstacles behind the vehicle and transmit signal to wireless display, which indicates distance down to about 0.3m. The 3 colour LCD screen makes changing distances very obvious, changing colour as you get closer and turning red when obstacles are less than 0.5m away. The smart display unit can be mounted anywhere visibly convenient and fixed with Velcro or double stick tape. It requires a 12V source - ideally this will come from an ignition controlled fuse or wire. The FM frequency used is 433.92. ISO9001 quality qualification.
BLACK, WHITE and SILVER flush mounting sensors available. |